This application has been popular for a number of years and is designed to stand on the ground close to the pump. As shown in the photograph, the Flowmeter is built into a robust, lightweight frame giving protection from accidental damage. 

It is fitted with 4” Bauer Couplings as standard (other options available) and 6mtrs of 12volt power cable with an international 3 pin plug.          

This display can be remotely wired into the tractor where it can be constantly monitored.  When the tractor and pump are separated it can be easily unplugged and the display remains with the tractor.  

• Factory calibrated for accuracy
• Worldwide product
• Built into a robust galvanized frame
• Components can be used for upgrading
• Economical start-up unit for farmer and contractor alike

This application is similar to the In-Line version but is built into the pipework of the Slurry Applicator, either Splashplate or Dribble Bar. All Slurrykat spreading equipment can be manufactured with the appropriate flanges to facilitate the Flowmeter as shown in the photograph (left).

The remote head can be used in the cab in the same way and is connected by a standard data cable.

The whole installation can be upgraded to use a computerized in-cab display as described later. The unit only needs to be reprogrammed.